Ag+ Anti-mould Spray
✔ Removes mould & helps prevent regrowth
✔ Chlorine-free & low odor
✔ Ideal for bathrooms, kitchens, basements & living spaces
✔ Gentle on surfaces & versatile to use
✔ Independently tested according to EN 16438
| Quantity | Unit price | Base price |
|---|---|---|
| To 1 |
€12.95
|
€21.58 / 1 Liter |
| To 2 |
€11.95
|
€19.92 / 1 Liter |
| To 3 |
€9.95
|
€16.58 / 1 Liter |
| From 4 |
€7.95
|
€13.25 / 1 Liter |
Available, delivery time: 1-3 days
Product information:
- Innovative, highly effective dual action against mould (with independent laboratory certification in compliance with EN 16438)
- Mould elimination with activated oxygen
- Long-term protection against mould due to high-performance silver additives
- Chlorine-free, which means no unpleasant odour, a moderate bleaching effect and no harmful ingredientsIdeal long-lasting anti-mould effect in combination with Ag+ paint
Ag+ Anti-mould Spray
Highest disinfection performance – chlorine-free.
Inactivates >99.999% of mold colonies.
The effectiveness of the product was confirmed by an independent hygiene laboratory according to EN 16438:2014 (without mechanical action). Interesting: even a 50% concentration of the product was able to meet the test requirements.
Test organism: Aspergillus brasiliensis (ATC 16404), Incubation temperature: 30±1°C, Test temperature: 10±1°C, Exposure time: 240 min, Germ carrier: stainless steel, Neutralizer: 2g/L cysteine(C), Organic load: filthy conditions; Disclaimer; Test results refer to the tested samples.
Physiology
Gloves and safety glasses are recommended, as H2O2 causes skin to appear whitish and it can lead to slight burning upon skin contact.
The product contains hydrogen peroxide which decomposes to water and oxygen. It is free of chlorine, which could lead to further toxic effects as a reaction product. The contained silver compound is also used on humans and is therefore not subject to GHS labelling requirements.
Range of application
The product can be used almost everywhere, as no unpleasant odours and hardly any bleaching effects arise.
Examples: Wallpaper, interior/exterior walls, bathrooms, boats, cars, joints, wood, plastics, etc.. Be careful with marble and calcareous natural stone. If in doubt, test on an inconspicuous area.
Please be sure to observe the application instructions on the packaging
PREPARATION FOR A SAFE APPLICATION
Gloves and safety glasses are recommended, as H2O2 causes skin to appear whitish and it can lead to slight burning upon skin contact.
Application
To begin with, moisten the mold area lightly with Ag+ mold spray, then remove mechanically (e.g. with a brush) and wipe off. Now spray the infested substrate intensively and, after complete drying (min. 12 h), mechanically remove any further swelling residues. In case of heavy infestation and not complete drying, apply several times and dry out to depth with an infrared heating plate.
Biocide registration number: N-88374. Active ingredients: 100 g contains 7.9 g hydrogen peroxide and 0.00024 g silver, as nanomaterial.
Use biocidal products with care. Read label and product information before use.
Application, Hazard and Precautionary Statements
Application:
We recommend gloves and possibly safety goggles, as H₂O₂ can cause the skin to appear whitish and burn slightly upon contact. At the beginning, slightly moisten the mold area with Ag+ mold spray, then remove it mechanically (e.g., with a brush) and wipe it down. Now spray the affected substrate intensively and, after complete drying (min. 12 h), mechanically remove any further swelling residues. In case of severe infestation and incomplete drying, apply multiple times and dry out deeply using an infrared heating plate.
The product is subject to the Biocide Directive. Biocide registration number: N-87307. Ready-to-use solution. Always read the label and product information before use. Use biocidal products carefully.
Active ingredients (per 100 g): 7.9 g hydrogen peroxide and 0.00024 g silver.
Note on skin contact: Skin contact with hydrogen peroxide may cause a whitish discoloration and slight burning. In this case, wash hands with soap and then apply a moisturizing hand cream.
Disposal: Dispose of only when closed and empty. Residual disposal & more: see SDS.
Hazard Statements (H Phrases):
• H319: Causes serious eye irritation.
Precautionary Statements (P Phrases):
• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P103: Read label before use.
• P280: Wear protective gloves / protective clothing / eye protection.
• P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P337+P313: If eye irritation persists: Get medical advice / attention.
Signal Word: Warning!
