Application

Our HELIX M static mixers for 2K adhesives with a 1:1 mixing ratio enable precise and reliable mixing of two-component adhesives. The universal fit design ensures easy compatibility with many common cartridge systems. The high-quality HELIX M static mixers ensure uniform blending of both components directly during dispensing. This guarantees optimal curing and maximum bonding performance. Universal Compatibility The mixing nozzles are compatible with all common 25 ml and 50 ml 1:1 cartridges from AP as well as many other manufacturers such as Henkel, Loctite, Weicon, Würth, Berner and similar systems. Material-Saving & Precise Thanks to the particularly low waste volume of only 1.04 ml, significantly less material is wasted per dispensing process compared to classic green Quattro mixers. This makes the mixing nozzles ideal for high-quality and expensive 2K adhesives. The fine dispensing tip allows very precise and controlled application. For high-viscosity materials, the tip can easily be individually shortened to increase material flow. Your Benefits at a Glance ✔ HELIX M static mixers for 2K adhesives ✔ Suitable for 1:1 mixing ratio systems ✔ Universal fit for 25 ml & 50 ml cartridges ✔ Material-saving design ✔ Fine dispensing tip for precise application ✔ Transparent side view for mixing control ✔ Practical 10-pack including AP application tips Technical Data ✔ 16 mixing elements ✔ 4.2 mm inner diameter ✔ 1.04 ml volume Package Contents 10 mixing nozzles + AP application tips Instructions for Use Attach the static mixer to the cartridge before use. Discard the first small amount of dispensed material to ensure complete mixing. The mixer should be replaced after use. Buy HELIX M Static Mixers Now Order the HELIX M static mixers for 2K adhesives online today and benefit from precise mixing, material-saving application and professional results.

Our HELIX S static mixers for 2K adhesives with a 10:1 mixing ratio enable highly precise and reliable mixing of two-component adhesives. The specially tailored design ensures easy application with compact cartridge systems. The high-quality mixing nozzles guarantee extremely thorough mixing of both components directly during dispensing. This ensures optimal activation, curing, and maximum bonding performance of your 2K systems. Specially compatible The mixing nozzles are engineered for the specific 10:1 mixing ratio and fit perfectly onto the 10 ml cartridges of our 2K adhesive Plastic MA. Material-saving & transparent mixing control With an exceptionally low internal volume of only 0.20 ml, very little material remains in the mixer after dispensing. This minimal dead space saves valuable adhesive and reduces waste to an absolute minimum. Despite the compact total length, the 10 mixing elements deliver outstanding mixing performance. The transparent side view also allows for ideal visual monitoring of the material flow and mixing process. The fine dispensing tip allows for targeted material application, even for delicate work. For thick or higher-viscosity materials, the dispensing tip can be easily enlarged with a simple cut to perfectly adjust the material flow. Your benefits at a glance ✔ HELIX S static mixers for 2K adhesives ✔ Specially designed for a 10:1 mixing ratio ✔ Perfectly suitable for 10 ml cartridges (e.g., Plastic MA from AP) ✔ Highly material-saving with only 0.20 ml volume ✔ Transparent side view for optimal mixing control ✔ Fine dispensing tip for precise and targeted application Technical Data ✔ Mixer type: HELIX S ✔ 10 mixing elements ✔ 2.2 mm inner diameter ✔ 0.20 ml volume ✔ Total length: 50 mm ✔ Mixing ratio: 10:1 Scope of Delivery 10 x mixing tips + AP application tips Application Instructions Attach the static mixer securely to the cartridge before use. Discard the first few centimeters of the dispensed material to ensure complete, homogeneous mixing before starting the actual bonding process. After use, place the sealing cap back onto the adhesive cartridge. Buy HELIX static mixers now Order your HELIX S static mixers for 2K adhesives online now and benefit from excellent mixing, maximum material savings, and professional results in your projects.

Our QUATTRO M static mixers for 2K adhesives with a 1:1 mixing ratio enable highly precise and reliable mixing of two-component adhesives. The universally fitting design ensures easy application with many standard cartridge systems. The high-quality mixing nozzles guarantee extremely thorough mixing of both components directly during dispensing. This ensures optimal activation, curing, and maximum bonding performance of your 2K systems. Universally compatible The mixing nozzles are universally applicable and compatible with all standard 25 ml and 50 ml 1:1 cartridges from AP as well as many well-known manufacturers such as Henkel, Loctite, Weicon, Würth, Berner, and similar systems. Best mixing results & fine dispensing tip Thanks to the 25 special mixing elements integrated inside, the two adhesive components are mixed intensely and homogeneously to minimize application errors. The fine dispensing tip allows for highly accurate, clean, and targeted material application, even for delicate work. For thick or higher-viscosity materials, the dispensing tip can be easily enlarged with a simple cut to perfectly adjust the material flow. Your benefits at a glance ✔ quattro pro static mixers for 2K adhesives ✔ Outstanding mixing results thanks to 25 mixing elements ✔ Universally suitable for all common 25 ml & 50 ml cartridges (1:1) ✔ Perfectly matched to 2K jewelry adhesives CG 610 & CG 500 ✔ Fine dispensing tip for precise and targeted application ✔ Individually trimmable tip for higher-viscosity media ✔ Convenient 10-pack including AP application tips Technical Data ✔ Mixer type: QUATTRO M ✔ 25 mixing elements ✔ 4.2 mm inner diameter ✔ 2.6 ml volume ✔ Total length: 122 mm ✔ Mixing ratio: 1:1 Scope of Delivery 10 x mixing tips + AP application tips Application Instructions Attach the static mixer securely to the cartridge before use. Discard the first few centimeters of the dispensed material (bead application) to ensure complete, homogeneous mixing before starting the actual bonding process. After use, leave the mixer on the cartridge as a seal; replace it with a new one for the next application. Buy QUATTRO static mixers now Order your QUATTRO static mixers for 2K adhesives online now and benefit from excellent mixing, precise adhesive application, and professional results in your projects.

Our QUATTRO S static mixers for 2K adhesives with a 1:1 mixing ratio enable highly precise and reliable mixing of two-component adhesives. The universally fitting design ensures easy application with many standard cartridge systems. The high-quality mixing nozzles guarantee extremely thorough mixing of both components directly during dispensing. This ensures optimal activation, curing, and maximum bonding performance of your 2K systems. Universally compatible The mixing nozzles are universally applicable and compatible with all standard 25 ml and 50 ml 1:1 cartridges from AP as well as many well-known manufacturers such as Henkel, Loctite, Weicon, Würth, Berner, and similar systems. Best mixing results & fine dispensing tip Thanks to the 18 special mixing elements integrated inside, the two adhesive components are mixed intensely and homogeneously to minimize application errors. The fine dispensing tip allows for highly accurate, clean, and targeted material application, even for delicate work. For thick or higher-viscosity materials, the dispensing tip can be easily enlarged with a simple cut to perfectly adjust the material flow. Your benefits at a glance ✔ quattro pro static mixers for 2K adhesives ✔ Outstanding mixing results thanks to 18 mixing elements ✔ Universally suitable for all common 25 ml & 50 ml cartridges (1:1) ✔ Fine dispensing tip for precise and targeted application ✔ Individually trimmable tip for higher-viscosity media ✔ Convenient 10-pack including AP application tips Technical Data ✔ Mixer type: QUATTRO S ✔ System: quattro pro mixer ✔ 18 mixing elements ✔ 4.2 mm inner diameter ✔ 1.7 ml volume ✔ Total length: 90 mm ✔ Mixing ratio: 1:1 Scope of Delivery 10 x mixing tips + AP application tips Application Instructions Attach the static mixer securely to the cartridge before use. Discard the first few centimeters of the dispensed material (bead application) to ensure complete, homogeneous mixing before starting the actual bonding process. After use, leave the mixer on the cartridge as a seal; replace it with a new one for the next application. Buy QUATTRO static mixers now Order your QUATTRO S static mixers for 2K adhesives online now and benefit from excellent mixing, precise adhesive application, and professional results in your projects.

The AP Wooden mouth spatulas made from birch wood are versatile disposable spatulas suitable for a wide range of applications in households, workshops, laboratories and DIY projects.  Unlike many comparable products, these wooden spatulas are manufactured in Europe, helping reduce transport distances while ensuring consistently high product quality. Versatile Applications These wooden tongue depressors are ideal for mixing epoxy resin and paints, labeling, crafting and many other applications. Your Benefits at a Glance ✔ 100 wooden mouth spatulas made from european birch wood ✔ Manufactured in Europe ✔ Versatile applications Material & Dimensions Material: Birch wood Dimensions: 150 × 17 × 2 mm Package Contents • 100 × Wooden mouth spatulas • Non-sterile packaging Order Now Order your AP Wooden Mouth Spatulas online today and benefit from versatile applications and reliable European manufacturing quality.